Mounting The Router Table; Dust Collecting Attachment - Craftsman 25481 Instructions For Assembly And Operation Manual

THEROUTER TABLEMUSTALWAYSBEFIRMLYAND SECURELY
MOUNTEDTOA WORK SURFACE BEFORE USE. FAILURE TO DO
SO COULDCAUSE TABLETOTIP OVERORSLIDE,RESUL.TING IN
PROPERTY DAMAGE ANDIORSERIOUSPERSONA[. I NJURY,
Eachleg has (4} lloles at the bottom for mounting. Firmly secure
router table to work surface usingappropriate fasteneis (not
provided)as shown in Fig, #10.
Attach 1"x 6"or 2" x 6"skids to bottom of legs as shown in Fig.
#10. then securetable firmly to work surface.
FIGUREI0
Unitizedfence is providedwith a hookup for most Craftsman2_"
and 1¼"hose diameterwet!drj vats.
FORALL OPERATIONS REQUIRING USEOFFRONT-SIDE OF
UNITIZEDFENCE, c onnectwet/dry vac as follows:
1. Raiseguard and lean it againstthe fence,
2. Attach2_" hosediameter nozzleas shown in Fig.#'! 1.
3. Attach 17" hosediameter nozzleas shown in Fig. #12,
4. Lowerguard and let it rest on the vac hose.
NOTE'. F ormaximum suction efficiency,stick a pieceof tape or use
a pieceOfscrap wood to cover up the opening in the rear of the
fence as shown in Figures1! and 12. Uncoveropening after use,
FOROPERATIONS REQUIRING USEOFBACKSIDE OF
UNITIZEDFENCE, D ONOTCONNECT WET/DRYVACAS IT
WILL HINDEROPERATION, THEBACKSIDE OFFENCE 1SONLY
FORCUTTING OPERATIONS ONTHE UNDERSIDE OF
WORKPIECE THE WORKPIECE DURINGSUCHOPERATIONS
COMPLETELY COVERS THEROUTER BIT AND THEDUST
CANNOT BE VACUUMED.
OPERATING ROUTER TABLE WITHOUTUSE
OFWET/DRYVACMAYRESULT tN
EXCESSIVE COLLECTION OFSAWDUSTAND CHIPSUNDERTHE
FENCE ANDTHE RETRACTABLE GUARD AREA,
FORYOUROWNSAFETY, ALWAYSUNPLUGTHE ROUTER AND
CHECKFUNCTION OFGUARDBEFORE EACHUSE REMOVE
DUSTAND CHIPSFROMGUARDAREAAS NEEDEDTO
MAINTAINGUARDFUNCTION, KEEP WORK AREACLEAN.
REMOVE UNITIZEDFENCE FROMTABLE(MAKESUREROUFEr_
tS UNPLUGGED) TO CLEAROUSTAND CHIPSTRAPPED
BElWEENFENCE ANDTABLETOE
FIGURE11
FIGURE 12
9