Table of Contents
Advertisement
TOOL
USE AND
CARE
SAFETY
,_WARNING:
BE SURE to read and understand
all Instructions
before
operating
this saw. Failure to follow all Instructions
listed below may result in
electric shock, Ilre and/or serious personal Injury.
ALWAYS use clamps or other practical ways to secure and support the
workplace
to a stable platform,, Holding the work by hand or against your body is
unstabts and may lead to loss of control
2 DO NOT force the tool.Use the correct tool and blade for your application,,
The correct toot and blade witl do Ihe job better and safer al the rats for whicil it is
designed
3, DO NOT use the tool it switch does not turn tl "On" or "Off",
Any tool thai cannot
be controlled with the switch is dangerous and must be repaired
4 DISCONNECT
the plug from the power source before making any adjustments,
changing
accessories
or storing the toot. Such preventive saiety measures reduce
the risk of starting the tool accidentally,
5 NEVER leave the tool running. ALWAYS turn It oil DO NOT {save the tool unlIl It
comes to a complete stop
6 STORE idle tools out of the reach of children and other untrained persons.
Tools are dangerous
in the hands of untrained users.
7 MAINTAIN
tools with care. Keep cutting tools sharp and clean, Properly maintained
tools with sharp cutting edges are less Jikely to bind and are easier to control,
8 CHECK for mlsaltgnment
or btndlrtg
of moving parts, breakage of parts, and any
other condition that may attect the tool's operation. If damaged, have the tool seP.,iced
before using
Many accidenls
are caused by poorly malnlained tools.
9 USE ONLY accessories
that are recommended
for this tool. Accessories
that may
be suitable for one tool may become hazardous when used on another tool.
10 Keep handles dry. clean.and free from oil and grease
ELECTRICAL
SAFETY
I
_WARNING:
Do not permft fingers
to touch the termlnals
of plug when
installing or removing the plug in_m 1he outlet,
1 Double insulated tools are equipped with a
polarized
plug (one blade is wider than the other).
This plug wilt fit in a polarized outlet only one way.
_tthe plug does not fit luliy in lhe outlet, reverse the
plug. if i_still does not fil, conlact a qualified electrician
1o inslalf a polarized outlet
Do not change the plug in
any way..
2. DoubIe _nsu_aIIon_]e[imlnates the need for the
three-wire grounded power cord and grounded power
suppty system. Applicable only to Class II
(double-insulated} toots This sabre saw Is s double
insulated tool
co.o, ll [l
9-8-06
17235
Hide quick links:
Advertisement
Table of Contents
