Table of Contents
Advertisement
Lockthe rakeassembly i nthestraight a headposition
byinstalling t hepivotpinthrough theholeinthe rear
ofthehitchassembly, Secure thepivot p inusing the
haircotterpin,Seefigure 4,
ATTACHUNG AND REMOVING
RAKE
CAUTION:
Use care when working around
a raised rake, Keep hands and feet out from
under the rake at all times, Serious injury can
result should the rake drop unexpectedly,
CAUTION:
Always place the sleeve hitch
in the lowered position when installing or
removing the rake,
Refer to your sleeve hitch manual and to figure 5,
Attach the rake to the sleeve hitch on your tractor
using the sleeve hitch pin,
Screw the two sleeve hitch stabilizer bolts against the
rake hitch and then tighten the jam nuts to eliminate
looseness in the hookup,
,
Adjust the sleeve hitch so that the rake is free to go
below ground leve! but can still be raised a minimum
of 5" above ground for transport,
Stabilizer bolts and jam nuts should be loosened
before removing the rake from the sleeve hitch,
STABILIZER
BOLTS
TRACTOR SLEEVE HITCH
FIGURE 5
Advertisement
Table of Contents
