Page 2
PARTS Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by six people is recommended. ACCESSORIES Use the follwing parts from your orignal gazebo Use the follwing parts from the hardware #6 (1) #1 (6) New Canopy...
ASSEMBLY INSTRUCTIONS PROCESS OF REMOVING GAZEBO CANOPY Fig. 1B Remove the tips of top crossbars (#2) from the pocket of old large canopy. See Fig. 1A. Then remove bolts (#4) and nuts (#5) which attached on the crossbars (#1) and top crossbars (#2). See Fig.
Page 4
PROCESS OF REPLACING NEW GAZEBO CANOPY Fig. 3B Attach the new canopy (#6) to top crossbars (#2) by inserting the top crossbars into the holes of the canopy. See Fig. 3A. Tighten the finial top (#3) onto the top of the canopy. See Fig. 3B. Fig.
Need help?
Do you have a question about the C-160-2GGZ and is the answer not in the manual?
Questions and answers