Cookingzone Heatsfood Toohot Or Not Enough; Fooddoesnotheatevenly; Poorcookingresults; Cooktopzone Controldisplayseand 2 Digitsled Maincontroldisplays,G,9, ,99,Off,,95,,95Or ,97 - Electrolux E30IC75FSS5 Use & Care Manual

Solutions to Common Problems
COOING ZONEH_TS FOODTOOHOTORNOTHOTENOUGH
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
• Incorrect power level setting. Adjust the power level setting higher or lower and refer to
recipe for guidance and adjust accordingly.
FOODDOESNOTHEATEVENLY
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
• Lightweight or warped pans were used. Be sure to use good quality cookware (Refer
to Figs. 20 & 21).
• Use only flat bottom, evenly balanced medium or heavyweight cookware. Heavy and
medium weight pans heat evenly. Because lightweight pans heat unevenly, foods may
burn more easily (See pages 12 & 13 for further information).
• Adjust Cooking Zone power level setting until the proper amount of heat is obtained.
POORCOOKmNG R ESULTS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
• Many factors affect cooking results. Adjust the recipe's recommended power levels or
cooking times.
• Cookware is too lightweight or warped. Use heavier quality cookware so foods being
prepared may cook more evenly.
COOKTOP ZONE CONTROL DmSP_YS EAND 2 DmGITS LED
MAmNCONTROL DmSP_YS00, 03, 0_, 05, 06OR m
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
• Induction Cooktop main control has detecteda fault or error condition. Try turning
electrical power supplyOFF and back ON to cooktopinorderto reset Cooktop main
controls. If fault r ecurs, record fault number and turnpower supplytoCooktop OFF.
COOKmNG Z ONELEDCONTINUOUSLY F_SHES F
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] 1 [] [] 1 []
• Induction Cooktop pan detection sensors do not see the correct cookware. Test with a
magnet to be sure cookware is made with Induction compatible material.
• Cookware has been removed from the Cooking Zone without turning the Cooking Zone
OFF. Place cookware back on to the Cooking Zone or if finished cooking turn of the
affected Cooking Zone.
• Cookware is not centered over the Cooking Zone properly. Refer to Fig. 20 for correct
cookware placement.