FULL ONE YEAR WARRANTY ON CRAFTSMAN INDUSTRIAL
If thisCraftsman Industrial Electric Drill fails due to a defect in material or workmanship within one year from the date
of purchase, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE
IN THE uNrrED STATES.
This warranty gives you specific legal rights, and you may also have other rightswhich vary from state to state.
Sears, Roebuck and Co., DEPT. 817 WA, Hoffrnan Estates, IL 60179
is a concept in safety, in electric
power tools, which eliminates the need for the usual three
wire grounded power cord and grounded suppty system,
Wherever there is electric current in the tool there are two
complete sets of insulation to protect the user. AiI exposed
metal parts are isolated from internal metal motor compo-
nents with protecting Insulation.
- Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician.
For service we suggest you return the tool to your nearest
Sears Store for repair. Always use original factory replace-
ment parts when servicing.
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL. Read owner's
manual carefully. Learn its applications and
limitations as well as the specificpotentialhazards
related to thistool.
2. GUARD AGAINST ELECTRICAL SHOCK by
preventingbody contactwith grounded surfaces.
For example:Pipes,radiators, ranges,refrigerator
3. KEEP GUARDS IN PLACE and In workingorder.
4. KEEP WORK AREA CLEAN. Clutteredareas and
5. AVOID DANGEROUS ENVIRONMENT. Don'tuse
powertool in damp or wet locationsor expose to
rain. Keep work area well lit.
6. KEEP CHILDREN AND VISITORS AWAY. All
visitorsshouldwear safety glassesand be kepta
safe distancefrom work area. Do not let visitors
contacttool or extensioncord.
7. STORE IDLE TOOLS. When not in use tools
should be stored in a dry and high or locked*up
place - out of the reach of children.
DON'T FORCE TOOL
It will do the job better and
safer at the rate for which it was designed.
small too_ or
attachment to do the job of a heavy duty tool. Don't
use tool for purpose not intended - for example - A
circular saw should never be used for cutting tree
limbs or logs.
Do not wear loose
clothing or jewelry that can get caught
moving parts and cause personal injury, Rubber
gloves and non-skid footwear
covering to contain long hair and keep it from being
drawn into nearby air vents.
eyeglasses have only impact-resistant lenses; they
are NOT safety glasses.
YOUR LUNGS. Wear a face mask or
dust mask if operation is dusty.
protection during extended periods of operation.