Spindle Lock Button - Craftsman 315.212010 Operator's Manual

SPINDLE
LOCK BUTTON
See Figure 3.
A spindle lock button has been provided for locking the
spindle which keeps the blade from rotating. Depress and
hold the lock button while installing, changing, or remov-
ing blade.
SPINDLE
LOCKBUTTON
Fig. 3
SWITCH TRIGGER
See Figure 4.
The saw will not start until you depress the switch lock
with your thumb then squeeze the switch trigger. To
prevent unauthorized use of the compound miter saw,
disconnect it from the power supply and lock the switch
in the OFF position. To lock the switch, install a padlock
(not included) through the hole in the switch trigger. A lock
with a long shackle up to 9/32 in. diameter may be used.
When the lock is installed and locked, the switch is
inoperable. Store the padlock key in another location.
SWITCH
TRIGGER Itl
PADLOCK
Fig. 4
The following tools (not included) are needed for making adjustments or installing the blade:
PHiLLiPSSCREWDRIVER
12
FRAMINGSQUARE
Fig. 5