Page of 19

CRAFTSMAN 171.25490 Owner's Manual Page 4

Industrial router table.
Hide thumbs

Advertisement

INTRODUCTION
How otlen have you needea a large guiclingsurface on a
muter table? Your Sears Craftsman Industrial Router
Table wilh Unitized Fence comes with:
a. A unique 4" high unitized fence designed to
assist end grain routing for making tenons,
sliding dovetails and tongue and groove joims
along with most edge and lace culling operations.
b. A specially designed pusM block witM quick clamp for
back up and clamp;rig boards up to 4" wictthfor end
grain routing.
c. An accurate and quick adjusting jointing fence adjust-
able to proper jointing depth of cut.
d. A unitized lence designed to enable routing opera-
tions like grooving; Iluting; veining: crown molding etc.
up to 2 V2"away lrom the edge toward the middle of
the board.
e, Dust collecting attachment for most shop vac hook
ups.
To increase the work surface of your muter table, "Sears
Craftsman 925212 Industrial Roular Table Extensions"
are available as an optional produ= from Sears,
In order to simplify handling and minimize any damage
that might occur during shipment, your new rouler table
is packaged unassembled.
We know you are anxious to
see w_al your new tool will do, but a few minutes spent
now carefully reading the following instructions, will
result in less frustration and more enjoyable operation
later.
Start by checking and accounting for all the loose paMs.
If any parrs are missing, contact your local Sears retail or
catalog outlet for replacement.
UNPACKING
AND CHECKING
CONTENTS
WARNING:
YOU MUST READ AND UNDERSTAND
ALL THE INSTRUCTIONS
COMPLETELY
BEFORE
ATTEMPTING
TO ASSEMBLE AND OPERATE YOUR
ROUTER AND ROUTER TABLE.
ASSEMBLY
ASSEMBLY
OF TABLE
1. Turn _he table upside clown.
2. Place one of the table legs al one end of the table as
shown in Figure 1.
3. Insert the #10-32 x %truss heacl screws through the
table lop and leg. Six are required for each leg.
FIGURE 1.

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: