Craftsman 172.276700 Operator's Manual page 16

TO REMOVE AND E MPTY DUST BAG (Fig. 5, 5 a and 5 b)
1. U nplug the s ander.
Z_ WARNING:
Failureto unplug the sander could result in accidental starting 1
causing possible serious personal injury.
l
2. Locate (2) tab connectors on either side of vac adapter/dust bag assembly and
squeeze. Pull assembly straight back and off of dust exhaust hole (see Fig. 5).
3. Turn dust bag assembly counterclockwise (embossed arrows show unlock and lock
rotation) and remove bag from vac adapter (see Fig. 5a, 5b).
Exhaust Hole
Dual Dust Ports
/\_. I'_:( Fig. 5a Fig. 5b
_.\/ _"_-_>_X._. ,Countercbckwise
__for OFF Dust Bag
z (,/ _,> f _J \ Dust Bag
VacAdapter _ _ _',, " %/A h
for ON "_ _/ _ _ " VacAdapter with Dual Dust
Ports
4. Empty bag by shaking aggressively until completely empty. Wipe dust and debris from
the vac adapter.
5. Reattach the bag assembly back onto the vac adapter, and reattach back onto the sander.
NOTE: Empty dust bag frequently so dust collection system works properly ]
Z_ WARNING: Empty dust bag before storage to help prevent possible fire 1
hazard, especially when resin coating or linseed oil finishes have been sanded.
J
16