Tool Use And Care Safety - Craftsman 320.10860-01 Owner's Manual

PERSONALSAFETY cont.
3. ALWAYS avoid accidental starting. BE SURE switch is in
the "Off" position before plugging in. DO NOT carry tools
with your finger on the switch_ Carrying tools with your finger
on the switch or plugging in tools that have the switch in
the "On" position invites accidents,
4. ALWAYS remove adjusting keys or wrenches before turning
the tool "On". A wrench or a key that is left attached to a rotating
part of the tool may result in personal injury,
5. DO NOT overreach. ALWAYS keep proper footing and
balance at all times. Proper footing and balance enables
better control of the tool in unexpected situations,
6. ALWAYS use safety equipment, Always wear eye protection.
TOOL USE AND CARE SAFETY
1. ALWAYS use clamps or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control
2. DO NOT force tool. Use the correct tool and blade for your application.
The correct tool and blade will do the job better and safer at the rate for
which it is designed
3. DO NOT use tool if switch does not turn it "On" or "Off". Any tool that
cannot be controlled with the switch is dangerous and must be repaired.
4. ALWAYS disconnect the plug from the power source before making
any adjustments, changing accessories,or storing the tool. Such
preventive safety measures reduce the risk of starting the tool accidentally.
5. ALWAYS store idle tools out of reach of children and other untrained
persons,Tools are dangerous in the hands of untrained users,
6. ALWAYS maintain tools with care. Keep cutting tools sharp and clean,
Properly maintained tools with sharp cutting edges are less likely to bind
and are easier to control.
7. ALWAYS check for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the tool's operation.
If damaged, have the tool serviced before using, Many accidents are
caused by poorly maintained tools,
6