Craftsman 358.794731 Operator's Manual page 8

25cc/1.5 cu.in. 2-cycle 200 mph/430 cfm gasoline powered blower/vac
Table of Contents

Advertisement

Available languages

Available languages

SHOULDER
STRAP ATTACHMENT
(optional
accessory
#71-85783)
1. Pass the shoulder strap over your
head and onto your left shoulder.
2. Snap the hook onto the retainer
(see following
illustration).
BLOWER
USE
Retah_er
VACUUM USE
Retah_er
KNOW YOUR BLOWER
READ THIS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations with your unit to familiarize yourself with the location
of the various controls and adjustments.
Save this manual for future reference.
Upper Vacuum Tube
Elbow Tube
Lower Vacuum
Tube
Starter
Rop_
Fuel Mix
Fill Cap _,
STOP
Throttte
Switch
Trigger
Spark
Plug
Upper Blower Tube
Lower Blower Tube
High-Speed
Nozzle
Primer
Bulb
STOP SWITCH
The STOP switch is used to stop the
engine. To stop the engine, push and
hold the STOP switch in the STOP posi-
tion until the engine stops.
THROTTLE
TRIGGER
The THROlq-LE TRIGGER is used to se-
lect the desired engine speed.
PRIMER BULB
The PRIMER BULB removes air from the
carburetor and fuel lines and fills them
with fuel. This allows you to start the en-
Handle
gine with fewer pulls on the starter rope.
Activate primer bulb by pressing it and
allowing it to return to its original posi-
tion.
CHOKE LEVER
The CHOKE helps to supply fuel to the
engine to aid in cold starting. Activate
the choke by moving the choke lever to
the FULL CHOKE position. After engine
attempts to start, move the choke lever
to the HALF CHOKE position. Once en-
gine starts, move choke lever to the
RUN position.
-8-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents