Deleting Raid Volumes - Lenovo ThinkPad W700ds Hardware Maintenance Manual

2. During the startup, when a prompt to press Ctrl+I to enter the Configuration Utility is displayed on the
screen, press and hold the Ctrl key, and press the I key.
3. The screen for Intel Matrix Storage Manager option ROM is displayed. Select "Create RAID Volume"
and press Enter.
4. Using the up and down arrow keys, Tab keys, and Enter key select the RAID level and fill in other fields.
5. Select "Create Volume" by pressing the Enter key. When the dialog box appears, press the Y key.
Attention: All existing data will be erased while the RAID volume is being created.
6. Exit the Configuration Utility.

Deleting RAID volumes

This section describes how to use the Intel Matrix Storage Manager option ROM Configuration Utility to
delete RAID volumes.
To delete RAID volumes, do as follows:
1. Turn on the computer.
2. During the startup, when a prompt to press Ctrl+I to enter the Configuration Utility is displayed on the
screen, press and hold the Ctrl key, and press the I key.
3. The screen for Intel Matrix Storage Manager option ROM is displayed. Select the RAID volume to be
deleted, and press Delete.
4. When prompted, press Y key to confirm the deletion of the selected RAID volume.
5. After deleting a RAID volume, you can:
• Return to step 2 to delete additional RAID volume.
• See "Creating RAID volumes" on page 53 for RAID volume creation.
• Use the arrow keys to select Exit and press Enter.
• Use the arrow keys to select Resetting disks to non-RAID, and press Enter.
Attention: If the Serial ATA item in the BIOS Setup Utility menu of the computer you are servicing was set to
AHCI when it was manufactured, then to create a RAID array you must first enable RAID in BIOS, create
RAID volume, and then reinstall the operating system. All data on the hard disks will be erased during this
process. For more information, see "Creating RAID volumes" on page 53.
54
ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual