Lenovo ThinkPad T520 User Manual page 230

Table 8. Config menu items (continued)
Menu item
Security menu items
Table 9. Security menu items
Menu item
Password
Fingerprint
212
User Guide
Submenu item
Console Type
Submenu item
Predesktop Authentication
Reader Priority
Security Mode
Password Authentication
Reset Fingerprint Data
Selection
• PC-ANSI
• VT100+
• VT-UTF8
Selection
• Disabled
• Enabled
• External ➙ Internal
• Internal Only
• Normal
• High
• Disabled
• Enabled
• Enter
Comments
If you select "0", use 60
seconds as default timeout
value.
If you select "255", waiting
time for establishing a
connection is unlimited.
Select the console type for
AMT.
Note: This console type
should match the Intel AMT
remote console.
Comments
Refer to "Security menu"
on page 203 and "Using
passwords" on page 97.
Enable or disable fingerprint
authentication before the
operating system is loaded.
If External ➙ Internal
is selected, an external
fingerprint reader is used
if attached. Otherwise, an
internal fingerprint reader
is used. If Internal Only
is selected, an internal
fingerprint reader is used.
If fingerprint authentication
fails, you can still start
the computer by entering
a password. If you have
selected "Normal", enter a
power-on password or a
supervisor password; if you
have selected "High", enter
a supervisor password.
Enable or disable password
authentication. If high
security mode is selected,
this item appears.
This option is used to erase
all fingerprint data stored
in the fingerprint reader
and reset settings to the
factory state (ex. Power-on
security, LEDs, etc.) As
a result, any power-on
security features previously