Page of 20

HP LaserJet Pro M521 Installation Manual

Hp laserjet pro mfp m521 - hardware installation guide.
Hide thumbs
LASERJET PRO MFP
*A8P80-90975*
*A8P80-90975*
A8P80-90975
Installation Guide
EN
Guide d'installation
FR
Guía de instalación
ES
Guia de Instalação
PT
‫מדריך התקנה‬
Lea esto primero
ES
HE
M521

Advertising

   Summary of Contents for HP LaserJet Pro M521

  • Page 1

    LASERJET PRO MFP M521 *A8P80-90975* *A8P80-90975* A8P80-90975 Installation Guide Guide d’installation Guía de instalación Guia de Instalação ‫מדריך התקנה‬ Lea esto primero...

  • Page 2

    15° - 30°C (59° - 86°F) 10% - 80% Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the product. Choisissez un support solide et un endroit propre, bien aéré et à l'abri du rayonnement direct du soleil pour placer votre produit. Busque un lugar sólido, bien ventilado, sin polvo y alejado de la luz solar directa para colocar el producto.

  • Page 6

    Connect the phone cord for fax. A country/region specific adapter for the RJ1 1 telephone cord may be required to connect to the telephone jack. Connectez le cordon de téléphone au télécopieur. Un adaptateur spécifique à votre pays/région pour le cordon de téléphone RJ1 1 peut être requis pour la connexion à...

  • Page 7

    1. Connect the power cord between the product and a grounded AC outlet. Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 100- 1 27 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the product, use only the power cord that is provided with the product. CAUTION: 2.

  • Page 8

    1. C onecte o cabo de alimentação entre o produto e a tomada CA aterrada. Verifique se sua fonte de alimentação é adequada para a classificação de tensão do produto. A classificação de tensão está na etiqueta do produto. O produto utiliza 100- 1 27 Vca ou 220-240 Vca e 50/60 Hz. Para evitar danos ao produto, use apenas o cabo de alimentação fornecido com o produto.

  • Page 9

    Choose a software install method. NOTE: You must have administrator privileges on the computer to install the software. Choisissez une méthode d'installation logicielle. REMARQUE : Vous devez disposer des privilèges d'administrateur sur cet ordinateur pour installer le logiciel. Seleccione un método de instalación de software. NOTA: debe tener privilegios de administrador en el equipo para instalar el software.

  • Page 10

    Software installation for Windows wired networks: Connect the network cable to the product and the network. Insert the CD into the computer, and follow the on-screen instructions. Installation is complete. NOTE: If the installation program does not detect the product on the network, you might need to enter the IP address manually. To find the IP address, touch the Setup button, touch Reports, and then touch Configuration Report.

  • Page 11

    Software installation for Windows wireless networks (wireless models only): 1. On the product control panel, touch the wireless button. Touch Wireless Menu, and then touch Wireless Setup Wizard. Follow the instructions to complete the wireless setup. 2. Insert the CD into the computer, and follow the on-screen instructions. Installation is complete. NOTE: If the installation program does not detect the product on the network, you might need to enter the IP address manually.

  • Page 12

    Software installation for Windows USB connections: HP Smart Install: The software installation files are in the product memory. The HP Smart Install program uses a USB cable to transfer the installation files from the product to your computer. Follow this procedure to use HP Smart Install: NOTE: To use HP Smart Install, you must have administrator privileges and AutoPlay must be enabled on the computer. 1.

  • Page 13

    Instalação do software para conexões USB Windows: HP Smart Install: Os arquivos de instalação do software estão na memória do produto. O programa HP Smart Install usa um cabo USB para transferir os arquivos de instalação do produto para o computador. Siga este procedimento para usar o HP Smart Install: OBSERVAÇÃO: Para usar o HP Smart Install, você...

  • Page 14

    Software installation for Mac OS X: 1. If you are using a USB or a wired network connection, connect the cable now. 2. Insert the CD into the computer, and follow the on-screen instructions. Installation is complete. NOTE: For network connections, if the installation program does not detect the product on the network, you might need to enter the IP address manually.

  • Page 15

    Software installation for Mac wireless networks (wireless models only): 1. On the product control panel, touch the wireless button. Touch Wireless Menu, and then touch Wireless Setup Wizard. Follow the instructions to complete the wireless setup. 2. Insert the CD into the computer, and follow the on-screen instructions. Installation is complete. NOTE: If the installation program does not detect the product on the network, you might need to enter the IP address manually.

  • Page 16

    To set up the Scan to E-mail, Scan to Network Folder, and Fax features, open the HP program folder on your computer, select the folder for this product, and then select the appropriate setup wizard. Follow the on-screen instructions. Setup is complete. If you did not register your product during software installation go to www.register.hp.com to register now.

  • Page 20

    La reproduction, l'adaptation ou la traduction de ce document sans permission is prohibited, except as allowed under the copyright laws. l'autorisation écrite préalable de Hewlett-Packard est interdite, sauf dans des conditions conformes aux lois relatives au copyright. The information contained herein is subject to change without notice.

Comments to this Manuals

Symbols: 0
Latest comments: