Safety Requirements - HP StorageWorks XP1024 Manual

Safety requirements

18
The following sections contain information to help you properly prepare
your facility for the arrival of your disk array.
Site safety consideration
When making decisions concerning site safety, your first concern should be
the safety of your personnel and then the safety of your equipment. Two
major safety considerations for any computer site are fire safety and
emergency power-off. If you have any questions on site safety, consult your
HP CE, your insurance carrier, and local building inspectors for safety
recommendations.
Fire safety
When considering fire safety, consult your insurance carrier and fire
department for suggestions and recommendations. They can analyze your
existing fire control systems, and advise you of any changes that may be
needed. If you are building a new site, or modifying an old site, consult
your local building codes for fire prevention and protection guidelines. You
can also consult your local HP CE and local fire inspectors for additional
information.
Equipment servicing hazards
You, your HP CEs and HP ASEs require safe access to the disk array.
Along with the specifications listed in "General computer room
requirements" (page
cables do not create a safety hazard.
Electrical hazards
The disk array cabinets contain dangerous voltages. To prevent injury or
death from electric shock, refer all electrical installation and service to
qualified personnel.
HP StorageWorks Disk Array XP1024: Site Preparation Guide
19), ensure that electrical or data communication