Collecting Audit Log Data - Hitachi XP P9500 User Manual

Log name
For details on how to change the collection level, see
Meaning of the Message ID KAPLnnnnn-l on page 8-2
Meaning of Message IDs on page
Collecting Error Information Using the Utility for Collecting HDLM
Error Information (DLMgetras)
HDLM provides the DLMgetras utility for collecting HDLM error information.
By using the DLMgetras utility, you can simultaneously collect all the
information required for analyzing errors: information such as integrated
trace files, definition files, and information on the OS. You can use the
collected information for when you contact your HDLM vendor or maintenance
company.
For details on the DLMgetras utility, see
HDLM Error Information on page

Collecting Audit Log Data

HDLM and other Hitachi storage-related products provide an audit log
function so that compliance with regulations, security evaluation standards,
and industry-specific standards can be shown to auditors and evaluators. The
following table describes the categories of audit log data that Hitachi storage-
related products can collect.
StartStop
Failure
LinkStatus
Description
Table 2-8 Categories of Audit Log Data That Can Be Collected
Category
An event indicating the startup or termination of hardware
or software, including:
•
•
•
An abnormal hardware or software event, including:
•
•
An event indicating the linkage status between devices:
•
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for VMware(R))
For details on how to set the
syslog file path, refer to the
VMware vSphere documentation.
8-2.
The DLMgetras Utility for Collecting
7-2.
Explanation
OS startup and termination
Startup and termination of hardware components
(including micro-program)
Startup and termination of software running on storage
systems, software running on SVPs (service
processors), and Hitachi Command Suite products
Hardware errors
Software errors (such as memory errors)
Link up or link down
Output destination
Table 8-1 Format and
in Format and
2-23