Hitachi XP P9500 User Manual page 110

-hbaportwwn
-vmruntimename
-vmstate
-t
Example
To display path information, by selecting a display item
-path -item
6-30
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The available parameter values to specify the second sorting key are:
• pn: Path name
• lu: LU number of the storage system
• cp: Port number of the CHA
When the -srt parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
Displays port WWN information for the HBAs connected to the storage
system.
Displays the runtime information for paths managed by VMware
vSphere in place of the PathName item.
Displays the status of paths managed by VMware vSphere. For details
on VMware vSphere path statuses, see
Between VMware vSphere and HDLM Path Statuses on page
Omits the title for each information item.
The following example displays path information:
>dlnkmgr view -path
Paths:000002 OnlinePaths:000002
PathStatus IO-Count
Online 42
PathID PathName
DskName
IO-Errors DNum HDevName
000000 0002.0000.0000000000000000.0000 HITACHI .DF600F .
77010152 0191 0B
t10.HITACHI_770101520191
000001 0005.0000.0000000000000000.0000 HITACHI .DF600F .
77010152 0191 1B
t10.HITACHI_770101520191
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
>
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Table 2-5 Correspondence
IO-Errors
0
iLU ChaPort Status Type IO-Count
Online Own
Online Non
2-15.
42 0 0
0 0 0