To Display Program Information For A Remote Management Client - Hitachi XP P9500 User Manual

KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
>

To Display Program Information for a Remote Management Client

-sys [-lic|-audlog]
Displays program information for HDLM installed on a remote
management client.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify any sub-
parameters, the command displays the version and license information for
HDLM on the remote management client.
information (for remote management clients) on page 6-27
parameters you can specify and the displayed information.
-t
Does not display the title for each information item.
Table 6-7 Items of program information (for remote management clients)
Parameter and
program
information to
be displayed
-lic
Information
about the HDLM
license
-audlog
Information
about audit log
data collection
settings
Item
License Type
Expiration
Audit Log
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Table 6-7 Items of program
Description
License type
•
Permanent
•
Temporary
•
Emergency
License expiration:
When using a permanent license: -
When using a temporary license or emergency
license: The license expiration period is displayed in
the format: yyyy/mm/dd (ndays after). When the
view -sys -lic operation is executed, (ndays
after) appears if there are n days left until the
license period expires.
• For example, when there are 100 days left until
the license period (2006/08/21) expires, the
following appears:
2006/08/21(100days after)
Settings for audit log data collection:
• Whether collection is enabled
on: Enabled
off: Disabled
• Audit log data collection level:
When audit log data collection is on, the
collection level that has been set is displayed
shows the
6-27