[lb] [vmpsp] [vmruntimename] [vmstate]|all]
[-hdev host-device-name|-pathid AutoPATH_ID]
[-t]
To display a summary of LU information
dlnkmgr [-s host-name -u user-name -p password] view -lu -c
[-t]
To Display the Format of the view Operation
To display the format of the operation for both a host and remote
management client:
dlnkmgr view
-help
To display the format of the operation for a host:
dlnkmgr -s host-name -u user-name -p password view
-help
To display the format of the operation for a remote management client:
dlnkmgr -l view
-help
Parameters (To display program information)
This section describes the parameters for the view operation, in the following
order:
To Display Program Information for Hosts on page 6-24
To Display Program Information for a Remote Management Client on page
6-27
To display path information on page 6-29
To display LU information on page 6-39
To display the format of the view operation on page 6-46
To Display Program Information for Hosts
-sys [-sfunc|-satp|-rule]
Displays program information for HDLM installed on a host.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify any sub-
parameters, the command displays all program information except for
SATP claim rules.
page 6-25
information.
6-24
Table 6-6 Items of program information (for hosts) on
shows the parameters you can specify and the displayed
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))