Hitachi XP P9500 User Manual page 348

Message ID
KAPL09135-E
KAPL09142-E
8-66
Message Text
One of the following was
executed at the same time as
an HDLM command set -lic
operation: another set -lic
operation, or an update of the
license for an update
installation.
HDLM aa...aa cannot be
performed. Wait a while, and
then perform aa...aa again.
Error Code = bb...bb
Hitachi Dynamic Link Manager User Guide (for Windows(R))
\Hitachi
For Windows Server 2003
(excluding the x86 edition) or
Windows Server 2008 (excluding
the x86 edition), Program Files
is Program Files (x86)
C:\Program Files (x86)\Common
Files\Hitachi
Do not remove the search paths that
were specified during the installation
of Windows from the Path system
environment variable because these
paths are required to install HDLM.
Action
Check the license by using the
HDLM command's view -sys -
lic operation. If necessary,
update the license by using the
set -lic operation during or
after the installation. If the same
error message is output, contact
your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Do not perform the following
operation: Execute the HDLM
command's set -lic operation
while updating a license for an
upgrade or re-installation of HDLM
Details
HDLM could not be installed or
uninstalled because Hitachi
Command Suite Common Agent
Component is being used.
aa...aa : "installation" or
"uninstallation"
bb...bb : Internal code (decimal
(base-10) number)
Action
When linkage is performed with
Global Link Manager, cancel
remote access. If this message is
still output, execute the hbsasrv
stop -f command as shown in the
Hitachi Global Link Manager
Software Installation and
Configuration Guide. Then, install
or uninstall HDLM again as
necessary.
Messages
Explanation