Hitachi XP P9500 User Manual page 292

Message ID
KAPL01041-E
KAPL01044-W A duplicate parameter value is
KAPL01045-W Too many parameter values are
KAPL01046-I
8-10
Message Text
The entered value is invalid. The
operation stops. Operation
name = aa...aa
specified. Operation name =
aa...aa, parameter = bb...bb,
parameter value = cc...cc
specified. Operation name =
aa...aa, parameters = bb...bb,
parameter value = cc...cc
An offline request was
registered in a batch job. PathID
= aa...aa
Hitachi Dynamic Link Manager User Guide (for Windows(R))
A value other than y and n was
entered. Enter y or n.
Action
Enter y or n.
Details
Command processing will be
aborted because an incorrect
value was entered three times in a
row for a request.
aa...aa: clear, offline, online,
or set
Action
Check the correct value, and then
re-execute the HDLM command.
Details
The same parameter value is
specified two or more times.
aa...aa: view
bb...bb: Parameter name
cc...cc: Duplicate parameter value
Action
Delete the duplicate parameter
value, and then retry.
Details
aa...aa: offline, online, set, or
view
bb...bb: Parameter name
cc...cc: Parameter value
Action
Execute help operation-name of
the HDLM command (dlnkmgr) to
check the parameter value, and
then retry. For details on the help
operation, see
Operation Format) on page
Details
The offline command was
executed but the path is currently
processing. If the view -path
operation is executed in this
status, Offline(P) will be
displayed. Wait a little while, and
then re-execute the view -path
operation to make sure that the
status is Offline(C).
aa...aa: Path ID (decimal
(base-10) number)
Messages
Explanation
help (Displays the
6-4.