Format
dlmchkpath {-singleconnect | -h}
Parameters
-singleconnect
Checks whether a single path configuration is being used to connect the
HDLM management-target LU to the host.
Examples
7-14
In the following example, the utility determines that the system is in a
single-path configuration:
>dlmchkpath -singleconnect
KAPL12401-I All LUs managed by HDLM are in a single path
configuration.
In the following example, the utility determines that the system is in a
multi-path configuration:
>dlmchkpath -singleconnect
KAPL12402-W iLU(0100) is in a multi-path configuration.
PathID = 0,3
KAPL12402-W iLU(0101) is in a multi-path configuration.
PathID = 1,4
KAPL12402-W iLU(0102) is in a multi-path configuration.
PathID = 5,2
In the following example, the view operation is performed when the
utility determines that the system is in a multi-path configuration. For
details about the view operation, see
page
6-29.
>dlnkmgr view -path -c
Paths:000006 OnlinePaths:000006
PathStatus
IO-Count
Online
152579
PathID DskName
Status
Type
000000 HITACHI .DF600F
Online
Own
000001 HITACHI .DF600F
Online
Own
000002 HITACHI .DF600F
Online
Non
000003 HITACHI .DF600F
Online
Non
000004 HITACHI .DF600F
Online
Non
000005 HITACHI .DF600F
Online
Own
KAPL01001-I The HDLM command completed normally. Operation
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
view (Displays Information) on
IO-Errors
30
iLU
.5455
0100
.5455
0101
.5455
0102
.5455
0100
.5455
0101
.5455
0102
CP
0C
0C
0C
1C
1C
1C