Uninstallation Procedures - Mscs Or Vcs Environment - Hitachi XP P9500 User Manual

¢
9 Follow the instructions shown in the messages that appear in the window.
.
If the KAPL09005-E message appears, stop the HDLM manager according
to the procedure in
stopping the HDLM manager, restart the uninstallation program.
10 When uninstallation finishes, a dialog box appears, prompting you to
.
restart the host.
Click the OK button to restart the host.

Uninstallation Procedures - MSCS or VCS Environment

To uninstall HDLM:
1 Log on to Windows.
.
Log on as a member of the Administrators group.
2 Stop all the processes and services that use the HDLM management-
.
target paths.
Stop any processes or application services, such as a DBMS, that are
using the HDLM management-target paths.
In Windows Server 2008, if you are not logged on as an administrator,
use the Run as administrator functionality.
3 Stop MSCS or VCS on all the hosts that make up the cluster.
.
When MSCS is used, follow the procedure described below.
Choose Administrative Tools and then Services. In the list of services,
right-click Cluster Service, and then from the Action menu choose Stop
to stop the service.
A message prompting you to restart the system might be displayed. If
this happens, choose No.
4 If a host and a storage system are connected via multiple paths,
.
reconfigure it so that only one path connects the host to the storage
system.
Uninstalling HDLM in a multi-path configuration, might cause the disk
contents to become corrupted when the host restarts. Make sure that you
uninstall HDLM from a single path configuration only.
Figure 3-7 Single Path Configuration and Multi-path Configuration on page
3-87
3-86
If a warning dialog box is not displayed, go to the next step.
Stopping the HDLM Manager on page
shows a single path configuration and a multi-path configuration.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
4-15. After