Hitachi XP P9500 User Manual page 120

Make sure that the PRSV key displayed by the dlmprsvkey utility is
unique among all the other hosts in the SAN. If the PRSV key is not
unique or is not registered, or if the KAPL09131-W message appears,
execute the dlmprsvkey utility with the -r parameter specified to re-
register the PRSV key. If the PRSV key is unregistered, HDLM functions
might not properly operate. For details about the dlmprsvkey utility, see
The dlmprsvkey Utility for Registering an HDLM Persistent Reservation
Key on page
the installation finishes. The KAPL09115-W message will appear if
deletion of this file fails. If this happens, delete the file manually.
20 Execute the dlnkmgr command's view operation to display the status of
.
each program.
An example of executing the dlnkmgr command's view operation is as
follows:
>dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Remove LU
Intermittent Error Monitor
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
21 Use the results of the view operation to check the version of the installed
.
HDLM.
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM
has been installed.
22 Use the results of the view operation to check that the programs are
.
running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
the programs are running correctly.
23 Check the path information as described in
.
Configuration on page
installed HDLM in a single-path configuration.
3-54
7-12. If you used a license key file, it will be deleted after
x.x.x-xx
x.x.x-xx
x.x.x-xx
-
3-68, and make sure that you have successfully
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
: x.x.x-xx
:
: on(extended lio)
: off
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
: off
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss 128
WakeupTime
yyyy/mm/dd hh:mm:ss
Checking the Path
ElogMem Size