When Vcs Is Used - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for windows (6.6) (hit5201-96006, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (574 pages) ,
- User manual (188 pages)
Table of Contents
Advertisement
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
22
Use the results of the view operation to check the version of the installed
.
HDLM.
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM
has been installed.
23
Use the results of the view operation to check that the programs are
.
running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive,
all the programs are running correctly.
24
After the installation finishes, check the path information as described in
.
Checking the Path Configuration on page
have successfully installed HDLM in a single-path configuration.
25
Connect cables to all the HBAs to change the configuration to a multi-path
.
configuration.
26
Check the path information as described in
.
Configuration on page 3-68
assembled a multi-path configuration.
When VCS Is Used
To install HDLM when VCS is used:
1
Start each host.
.
Start them in a single-path configuration.
2
Use the VCS Configuration Wizard to configure the Cluster components.
.
3
Restart the hosts.
.
4
Log on to Windows as a member of the Administrators group.
.
5
Stop VCS.
.
6
Save the license key file directly under the Windows installation-
.
destination drive.
Also, instead of using the license key file, you can directly specify the
license key during the installation of HDLM.
installation-drive:\hdlm_license
The license key file will be deleted after the installation finishes.
7
Perform the installation.
.
¢
3-42
x.x.x-xx
x.x.x-xx
x.x.x-xx
-
If you are not performing an unattended installation, insert the DVD.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss 128
WakeupTime
yyyy/mm/dd hh:mm:ss
3-68, and make sure that you
Checking the Path
to make sure that you have successfully
ElogMem Size
Advertisement
Table of Contents
