Hitachi XP P9500 User Manual page 93

Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If the KAPL09172-E message is displayed, the hdisk for the device that is
managed by HDLM still remains. Re-execute the procedure starting from
step 6.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
11 Execute the following command to make sure that the package is
.
installed.
# lslpp -la DLManager.mpio.rte
Make sure that the fileset item in the output listing contains
DLManager.mpio.rte, and all the displayed statuses are COMMITTED.
If one or more of the displayed statuses are BROKEN, uninstall and then
re-install HDLM.
12 Unmount the DVD-ROM.
.
# umount /cdrom
13 Delete the created mount directory.
.
# rm -r /cdrom
14 If a single-path configuration is used, connect cables to all HBAs to
.
change the configuration to a multi-path configuration.
Note that, regardless of the configuration, do not execute the cfgmgr
command.
15 Execute the following command to restart the host:
.
# shutdown -Fr
16 Make sure that the boot disk is in a multi-path configuration:
.
# lspath -l hdisk10 -s available
Available hdisk10 fscsi0
Available hdisk10 fscsi1
...
The following procedure assumes that hdisk10 is recognized as a boot
disk:
17 Check the current boot disk list:
.
# bootlist -m normal -o
hdisk10 blv=hd5
hdisk0 blv=hd5
hdisk1 blv=hd5
...
18 Specify boot disks that are suitable for your host environment:
.
# bootlist -m normal hdisk10 hdisk0 hdisk1
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-31