Hitachi XP P9500 User Manual page 92

In this example, hdisk3 and hdisk4 are recognized as devices to be
managed by HDLM. If all devices to be managed by HDLM are recognized,
proceed to step 6.
If any devices to be managed by HDLM are not recognized, proceed to
step 8.
7 Execute the following utility to remove, from the running kernel, the
.
HDLM management-target device:
# /cdrom/HDLM_AIX/hdlmtool/dlmrmdev -f
The KAPL10529-I message is displayed.
If the KAPL10529-I message is not displayed, the HDLM management-
target device has not been deleted. Make sure that no processes,
services, file systems, or volume groups are using any HDLM
management-target paths, and then re-execute the above utility.
Note that an hdisk recognized as a boot disk will not be deleted.
8 Execute the following command to make sure that the hdisks recognized
.
as the devices to be managed by HDLM have been deleted:
# lsdev -Cc disk
9 Prepare the license key or license key file.
.
¢
¢
Note that the hdlm_license and dlm.lic_key files are deleted after
installation finishes successfully.
10 Execute the following command:
.
¢
¢
3-30
When only the license key has been provided
Create the /var/DLM directory, and then, in this directory, create the
license key file (dlm.lic_key). The following shows an example when
the license key is 123456789ABCDEF:
# mkdir /var/DLM
# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
When the license key file has been provided
Store the license key file directly under the /var/tmp/ directory by
using the hdlm_license name.
/var/tmp/hdlm_license
When installing HDLM from the DVD-ROM
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXgd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
When installing HDLM from the directory to which the DVD-ROM was
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))