Hitachi XP P9500 User Manual page 87

Create the /var/DLM directory, and then, in this directory, create the
license key file (dlm.lic_key). The following shows an example when
the license key is 123456789ABCDEF:
# mkdir /var/DLM
# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
When the license key file has been provided
¢
Store the license key file directly under the /var/tmp/ directory by
using the hdlm_license name.
/var/tmp/hdlm_license
Note that the hdlm_license and dlm.lic_key files are deleted after
installation finishes successfully.
8 Execute the following command:
.
When installing HDLM from the DVD-ROM
¢
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXgd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
When installing HDLM from the directory to which the DVD-ROM was
¢
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If the KAPL09172-E message is displayed, the hdisk for the device that is
managed by HDLM still remains. Re-execute the procedure starting from
step 5.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
9 Execute the following command to make sure that the package is
.
installed.
# lslpp -la DLManager.mpio.rte
Make sure that the fileset item in the output listing contains
DLManager.mpio.rte, and all the displayed statuses are COMMITTED.
If one or more of the displayed statuses are BROKEN, uninstall and then
re-install HDLM.
10 Unmount the DVD-ROM.
.
# umount /cdrom
11 Delete the created mount directory.
.
# rm -r /cdrom
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-25