Hitachi XP P9500 User Manual page 377
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (422 pages) ,
- User manual (188 pages)
Table of Contents
Advertisement
Message
ID
KAPL10003-
The first parameter has not been set to a
W
directory. Value = aa...aa
KAPL10004-
The parameter contains an incorrect
W
value. Value = aa...aa
KAPL10005-
The number of parameters is insufficient.
W
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
retry. For details on the
DLMgetras utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page
Details
The first parameter must
be set to a directory to
which collected information
is output.
aa...aa: First parameter
Action
Check the parameters of
the DLMgetras utility for
collecting HDLM error
information, and then
retry. For details on the
DLMgetras utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page
Details
The first parameter must
be a directory. The second
parameter must be -f.
aa...aa: Invalid parameter
Action
Check the parameters of
the DLMgetras utility for
collecting HDLM error
information, and then
retry. For details on the
DLMgetras utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page
Details
The -f parameter exists
but the file for defining the
information to be collected
does not exist.
Action
Check the parameters of
the DLMgetras utility for
collecting HDLM error
information, and then
retry. For details on the
DLMgetras utility, see
DLMgetras Utility for
7-4.
7-4.
7-4.
8-75
Advertisement
Table of Contents
