Message
ID
KAPL01103-
I
KAPL01104-
I
KAPL01112-
E
8-24
Message Text
If you are sure that there would be no
problem when all the paths which pass
the specified aa...aa port are placed in
the Offline(C) status, enter y. Otherwise,
enter n. [y/n]:
All the paths which pass the specified
aa...aa port will be changed to the Online
status. Is this OK? [y/n]:
An attempt to connect to the HDLM driver
has failed. Operation name = aa...aa
Messages
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Explanation
If you want to execute the
offline processing for the
paths which pass the
specified target, enter y. If
you want to terminate the
processing, enter n.
Details
This message re-asks the
user whether to place all
the paths Offline(C). To
place all the paths
Offline(C), enter y. To not
place them Offline(C),
enter n.
aa...aa:CHA, HBA
Action
If you want to execute the
offline processing for the
paths which pass the
specified target, enter y. If
you want to terminate the
processing, enter n.
Details
Multiple paths will be
collectively placed Online
because the -hbaid or -
chaid parameter was
specified. To collectively
place multiple paths
Online, enter y. To not
collectively place them
Online, enter n.
aa...aa:CHA, HBA
Action
If you want to execute the
Online processing for the
paths which pass the
specified target, enter y. If
you want to terminate the
processing, enter n.
Details
HDLM driver information
must be collected to
execute the given HDLM
command, but the HDLM
driver cannot be accessed.
aa...aa: clear, offline,
online, set, or view
Action