Hitachi XP P9500 User Manual page 101
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (188 pages) ,
- User manual (640 pages)
Table of Contents
Advertisement
Note that the hdlm_license and dlm.lic_key files are deleted after
installation finishes successfully.
10
Insert the HDLM DVD-ROM into the DVD-ROM drive, and mount the DVD-
.
ROM..
If you install HDLM by using a directory to which the DVD-ROM is copied,
you do not have to perform this step.
11
For an upgrade installation, execute the following command:
.
When installing HDLM from the DVD-ROM
¢
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXgd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
When installing HDLM from the directory to which the DVD-ROM was
¢
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If you execute the dlmrmdev utility without the -e parameter specified at
step 3 or 7 and then the KAPL09048-E message is displayed, the hdisk for
the device that is managed by HDLM still remains.
If you execute the dlmrmdev utility with the -e parameter specified at
step 3 or 7 and then the KAPL09048-E message is displayed, the hdisk for
the device that is managed by HDLM still remains, and its status is
Available. Re-execute the procedure in step 3.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
12
For a re-installation, execute the following command:
.
When installing HDLM from the DVD-ROM
¢
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXFd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
When installing HDLM from the directory to which the DVD-ROM was
¢
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXFd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-39
Advertisement
Table of Contents
