Hitachi XP P9500 User Manual page 681

Action
Restart the computer.
KAPL12559-E
An invalid value was specified in the parameter. Option = aa...aa,
Parameter = bb...bb
Details
aa...aa: Option
bb...bb: Specified parameter(Maximum 10 characters. If there are more than 10
characters, only 10 characters will be output followed by
Action
Refer to 7.6 dlmsetopt Utility for Setting HDLM Driver Options, and then
specifying the correct argument. Then, re-execute the
KAPL12560-E
An option is not specified.
Action
Refer to 7.6 dlmsetopt Utility for Setting HDLM Driver Options, specify the
correct argument, and then re-execute the
KAPL12561-E
An invalid option was specified. Option = aa...aa
Details
aa...aa: Option
Action
Refer to 7.6 dlmsetopt Utility for Setting HDLM Driver Options, specify the
correct argument, and then re-execute the
KAPL12562-E
A necessary file or directory was not found. File or directory
name = aa...aa
Details
aa...aa: Referenced directory or file name
Action
Make sure that the directory or file indicated in the message has not been
renamed. If the directory or file has been renamed, change the name back to its
original name, and then re-execute the utility for setting HDLM driver option
(
dlmsetopt
).
)
...
dlmsetopt
utility.
dlmsetopt
utility.
dlmsetopt
8. Messages
utility.
657