Hitachi XP P9500 User Manual page 588

8. Messages
separated by period)
aa...aa: Host ID (host port number) (decimal number)
bb...bb: Channel number (bus number) (decimal number)
cc...cc: Target ID (target ID) (decimal number)
dd...dd: LUN (host LU number) (decimal number)
Action
Please perform the following steps.
1. Note down the HCTL values of the SCSI device as shown in the error
messages.
2. Obtain the corresponding HDLM device name for the HCTL value noted in
step 1 by using the following command:
# dlmcfgmgr -v
3. Unregister the HDLM devices by using the following command:
# dlmcfgmgr -u
4. Reconfigure the HDLM by using the following command:
# dlmcfgmgr -r
KAPL05708-E
The system retried to allocate memory aa...aa times, but the
retries failed. (bb...bb:cc...cc)
Details
aa...aa: Memory allocation retry count (decimal number)
bb...bb: File ID, line number (hexadecimal number)
cc...cc: Memory allocation size (hexadecimal number)
Action
Execute the utility for setting HDLM driver option (
number of retries for allocating memory. For details on the
7.6 dlmsetopt Utility for Setting HDLM Driver Options. Increase system
memory. Stop any unnecessary processes. If the problem is not solved, execute
the
DLMgetras
your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM. For details on the
Utility for Collecting HDLM Error Information.
KAPL05709-I
The system will retry to allocate memory aa...aa times.
564
logical-device-file-name-of-the-HDLM-device
utility for collecting HDLM error information, and then contact
DLMgetras
) and increase the
dlmsetopt
utility, see
dlmsetopt
utility, see 7.2 DLMgetras