Hitachi XP P9500 User Manual page 516

7. Utility Reference
HDLM device that is not managed by HDLM, that HDLM device will not be
managed by HDLM.
logical-device-file-name-of-the-HDLM-device
-o {
Use this parameter to exclude the management-target HDLM device from being
managed.
You can specify one or more logical device file names of an HDLM device (
dev/sddlm[
for HDLM devices, see 2.6 Logical Device Files for HDLM Devices.
If you want to exclude all the HDLM devices from being managed, specify
Specifying
causes an error.
Specifying the
specify a logical device file name of an HDLM device that does not exist,
non-HDLM device, or HDLM device that is already defined as a
non-HDLM-managed device, the specification is ignored.
The
dlmcfgmgr
while Linux is running. The specified HDLM device can be excluded from being
managed immediately after execution of the utility, except when the specified
HDLM device is in use. If the specified HDLM device is in use, an error occurs.
You can use this parameter to exclude the HDLM devices that are no longer
required to be managed by HDLM. The excluded HDLM devices are not
displayed with the
files for these devices are not created. Therefore, these devices become
unavailable to the user.
logical-device-file-name-of-the-HDLM-device
-i {
Use this parameter to reset the HDLM device that has been excluded from being
managed to an HDLM management target.
You can specify one or more logical device file names of an HDLM device (
dev/sddlm[
HDLM devices, see 2.6 Logical Device Files for HDLM Devices.
If all the HDLM devices are the target, specify
a logical device file name of an HDLM device causes an error.
Specifying the
specify a logical device file name of an HDLM device that does not exist,
non-HDLM device, or HDLM device that is already defined as a management
target, the specification is ignored.
The
dlmcfgmgr
while Linux is running. The specified HDLM device becomes available
492
aa-pap ) as a parameter value. For details on logical device files
]
together with a logical device file name of the HDLM device
all
parameter without a parameter value also causes an error. If you
-o
utility with this parameter can be executed a number of times
command's
dlnkmgr
aa-pap ) as a parameter value. For details on logical device files for
]
parameter without a parameter value causes an error. If you
-i
utility with this parameter can be executed a number of times
...|all}
operation and the HDLM device
view
...|all}
. Specifying
all all
/
.
all
/
together with