Dlmcfgmgr Utility For Managing The Hdlm Configuration; Format; Parameters - Hitachi XP P9500 User Manual

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

7.3 dlmcfgmgr Utility for Managing the HDLM Configuration

For management by HDLM, the HDLM-configuration definition utility obtains the
SCSI device information stored by Linux by detecting the information on the path
between the host and storage system to register in HDLM, and then creates, updates,
or deletes the HDLM devices. Also, this utility sets an HDLM device as a management
target or excludes it from being managed.
When an existing device is updated during execution of this utility, the definition of
the HDLM device is inherited.
Whenever you make any changes to the storage system configuration (adding or
deleting an LU or path), LU partitions, or hardware configuration on the host, restart
the host or execute the
The operation log is obtained while the

7.3.1 Format

/sbin/dlmcfgmgr
[-s]
{-r
|-o {
|-i {
|-v [-udev]
|-u {
|-logfs [

7.3.2 Parameters

The following table lists and describes each parameter name and its functionality:
Table 7-5: Functionality of the Parameters of the dlmcfgmgr Utility
Parameter
Executes the
-s
Registers the HDLM device path while the host is running.
-r
Excludes a management-target HDLM device from being managed.
-o
Returns an HDLM device, which was excluded from being managed by HDLM, to being a
-i
management-target HDLM device.
Displays the management status and configuration information of all the HDLM devices
-v [-udev]
recognized by HDLM.
Deletes the paths displayed as hyphens (
-u
configuration information that is displayed by specifying the
utility to re-configure the HDLM devices.
dlmcfgmgr
dlmcfgmgr
logical-device-file-name-of-the-HDLM-device
logical-device-file-name-of-the-HDLM-device
logical-device-file-name-of-the-HDLM-device
dlmcfgmgr-utility-log-file-size
Functionality
utility without displaying the confirmation message.
dlmcfgmgr
-
utility is executed.
]}
) in the
column of the HDLM device
Device
parameter.
-v
7. Utility Reference
...|all}
...|all}
...|all}
489

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents