Hitachi XP P9500 User Manual page 468

6. Command Reference
When you use the
in the product ID element of the
11 or more characters in the product ID, the 8th and following characters are
abbreviated to ellipses (
The sub-parameters (following
-stname
Use this parameter to display the model ID of the storage system in the
product ID element of the
the command displays the product ID or emulation type of the storage system
instead.
For details about the information about product IDs, see
Table 6-14: Product ID displayed by the view -path operation.
-srt {lu|cp}
Use this parameter to sort the path information in ascending order, according
to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of the
storage system (
the
-srt
The available parameter values to specify the second sorting key are:
•
•
When the
ascending order of AutoPATH_IDs.
-t
Omits the title for each information item.
Example
The following example shows how to abbreviate the display of information
about the paths, ordered by iLU.
444
parameter, the number of characters that can be displayed
-c
).
...
-path -c
DskName
), the second sorting key is the value specified by
DskName
parameter, and the third sorting key is AutoPATH_ID.
: LU number of the storage system
lu
: Port number of the CHA
cp
parameter is omitted, the path information is listed in
-srt
field is limited to 10. When there are
DskName
) are:
field. When this parameter is omitted,