Autopath_Id - Hitachi XP P9500 User Manual

6. Command Reference
connected to the target CHA port:
When the confirmation message is displayed, the user enters
or
n
# /opt/DynamicLinkManager/bin/dlnkmgr offline -cha
-pathid 000001
KAPL01055-I All the paths which pass the specified CHA
port will be changed to the Offline(C) status. Is this
OK? [y/n]:y
KAPL01056-I If you are sure that there would be no problem
when all the paths which pass the specified CHA are placed
in the Offline(C) status, enter y.
[y/n]:
KAPL01061-I 2 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
#

AutoPATH_ID

-pathid
Use this parameter to place a single path offline.
Specify the current AutoPATH_ID of the target path, which is displayed by using
the
view
Information). Leading zeros can be omitted (
AutoPATH_ID); however, when the target AutoPATH_ID is
000000
AutoPATH_IDs are re-assigned every time the host is restarted. When you want
to add a new LU without restarting the host, AutoPATH_IDs are re-assigned to
each path of the LU when you execute the
HDLM configuration. Always make sure that you use the
the current AutoPATH_ID of the target path, before executing the
operation.
SCSI-device-name
-device
Use this parameter to place offline a path connected to the specified SCSI device.
For SCSI-device-name, specify the value of
operation as follows:
view
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
For details on how to execute the
name, see (3) To display LU information in 6.7.2 Parameters (To display
program information). Only one case-sensitive parameter value can be specified.
Example
The following shows an example of how to place offline a path whose SCSI
406
to cancel the operation.
operation. For details about the
or for the parameter value.
0
Otherwise, enter n.
operation, see 6.7 view (Displays
view
and
000001
utility for managing the
dlmcfgmgr
displayed by executing the
Device
operation and display the SCSI device
view
to continue,
y
indicate the same
1
, enter
000000
operation to find
view
offline