Hitachi XP P9500 User Manual page 390

4. HDLM Operation
Figure 4-3: When the Status of the Path That Goes Through the Fiber Cable to
Be Replaced Is Offline(C)
2. Replace the fiber cable for the path that has been placed in Offline(C) status.
In this example, replace the fiber cable connected to the HBA with host port
number
0001
3. Place in Online status the path that goes through the replaced fiber cable (that is,
the path that goes through the HBA connected to the fiber cable).
For example, to place in Online status the path that goes through the HBA with
host port number
# /opt/DynamicLinkManager/bin/dlnkmgr online -hba 0001.0000
4. Check the path information.
For example, execute the following command:
366
.
and bus number
0001
, execute the following command:
0000