Settings For Vcs - Hitachi XP P9500 User Manual

3. Creating an HDLM Environment

3.16 Settings for VCS

The following is the procedure that must be executed by the user when HDLM is
installed in an environment that uses VCS. For details on how to operate the VCS GUI,
see the VCS documentation.
1. Stop the cluster service of VCS.
2. Change the SCSI device used by VCS to an HDLM device.
Change the
device to an HDLM device.
3. Start the cluster service of VCS.
268
parameter of the
Block Devices
resource from the SCSI
Mount