# mkdir /mnt/lvol1
9.
Mount the logical volume.
The following example shows how to mount the logical volume to the
directory:
lvol1
# mount /dev/vg01/lvol1 /mnt/lvol1
3.10.3 When Moving a Logical Volume Created on a SCSI Device in
a Single-Path Environment to an HDLM Device
This subsection explains the procedure for moving a logical volume created on a SCSI
device in a single-path environment to an HDLM device in a multi-path environment.
Use the following procedure to configure the environment in Figure 3-30: Device
Configuration When a Logical Volume on a SCSI Device Is Moved to an HDLM
Device.
Figure 3-30: Device Configuration When a Logical Volume on a SCSI Device
Is Moved to an HDLM Device
3. Creating an HDLM Environment
/mnt/
253