Notes On An Upgrade Installation Or Re-Installation Of Hdlm; Notes On A Device Manager Agent - Hitachi XP P9500 User Manual

# /sbin/dlmcfgmgr -i
5. Start the HAL daemon.
Execute the
# /sbin/service haldaemon start
Make sure that the HAL daemon is running.
Execute the
is running.
# /sbin/service haldaemon status

3.5.4 Notes on an Upgrade Installation or Re-installation of HDLM

A license key is required to perform a re-installation or upgrade installation of
HDLM after the valid license period has expired.
To update the HDLM license, execute the
operation. The expiration time of the license key is determined by the type of
license key specified in the license key file or entered by the user. For information
on license key types and the
Environment).
The HDLM manager is stopped during an upgrade installation. Therefore, when
you perform an upgrade installation, stop any applications that require HDLM
manager operations, such as a log output operation.
• Because the HDLM manager is stopped during an upgrade installation, an
error log will not be output. Also, you will not be able to set up HDLM
functions. After the upgrade installation finishes successfully, immediately
restart the host.
• Do not cancel an upgrade installation.

3.5.5 Notes on a Device Manager Agent

When installing HDLM on a host where Device Manager agent 5.0 or later is
installed, do not execute any of the following commands of Device Manager
agent during installation:
hbsasrv, HiScan, hdvmagt_account, hdvmagt_schedule, hldutil,
TIC
command to start the HAL daemon.
/sbin/service
command to make sure that the HAL daemon
/sbin/service
operation, see 6.6 set (Sets Up the Operating
set
3. Creating an HDLM Environment
command's
dlnkmgr set -lic
137