Kapl10001 To Kapl11000 - Hitachi XP P9500 User Manual

Message
ID
KAPL09604
-E

KAPL10001 to KAPL11000

Message
ID
KAPL10001
-W
KAPL10002
-W
KAPL10003
-W
8-74
Message Text
A system error occurred. The
installation will now stop.
(command = aa...aa, error code =
bb...bb)
Message Text
No parameter has been specified.
Too many parameters have been
specified.
The first parameter has not been
set to a directory. Value = aa...aa
Messages
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
Details
aa...aa: Command that failed
bb...bb: Return value
Action
Acquire the log /var/tmp/
hdlm_installux_sh.log, and
then contact your HDLM vendor
or, if you have a maintenance
contract, contact the maintenance
company.
Explanation
Details
No directory to which the
collected information will be
output has been specified.
Action
Check the parameters of the
DLMgetras utility for collecting
HDLM error information, and then
retry. For details on the
DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Details
Four or more parameters have
been specified.
Action
Check the parameters of the
DLMgetras utility for collecting
HDLM error information, and then
retry. For details on the
DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Details
The first parameter must be a
directory to which collected
information will be output.
aa...aa: First parameter
Action
The
The