Message
ID
KAPL05001 to KAPL06000
Message
ID
KAPL05003
-I
KAPL05008
-E
KAPL05011
-E
Message Text
Message Text
The HDLM driver (filter component)
was successfully attached to Disk
(aa...aa), Partition (bb...bb).
Could not allocate memory.
(aa...aa:bb...bb) Execute the
DLMgetras utility to collect error
information, and then contact your
vendor or maintenance company.
Refer to the HDLM User's Guide for
instructions how to execute the
DLMgetras utility.
Could not attach the HDLM driver
(filter component) to Disk (aa...aa),
Partition (bb...bb). (cc...cc:dd...dd)
Execute the DLMgetras utility to
collect error information, and then
contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to
execute the DLMgetras utility.
Messages
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
None.
Explanation
Details
The path for the disk and
partition was registered
successfully in the core logic.
aa...aa: minor number of the sd
or ssd device (decimal number)
bb...bb: slice number
Action
None.
Details
The OS memory reservation
function started but returned an
error.
aa...aa: File ID, line number
(hexadecimal number)
bb...bb: Target memory size
(hexadecimal number)
Action
Check whether the HDLM driver
has started normally. If it has
not started or contains an error,
execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM. For details on the
DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Details
An attempt to register the path
for the disk and partition into the
core logic has failed.
aa...aa: Minor number of the sd
or ssd device (decimal number)
bb...bb: Slice number (decimal
number)
The
8-35