Hitachi XP P9500 User Manual page 361

When you use the -c parameter, the number of characters that can be
displayed in the product ID element of the DskName field is limited to 10.
When there are 11 or more characters in the product ID, the 8th and
following characters are abbreviated to an ellipsis (...).
The following shows the subsequent sub-parameters (following -path -
c):
-stname
Use this parameter to display the model ID of the storage system in
the product ID element of the DskName field. When this parameter is
omitted, the command displays the product ID or emulation type of
the storage system instead.
For details about the information about product IDs, see
Product ID Displayed by the view -path Operation on page
-srt {lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The available parameter values to specify the second sorting key are:
• lu: LU number of the storage system
• cp: Port number of the CHA
When the -srt parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-t
Omits the title for each information item.
Example
The following example shows how to display a summary of the path
information in order of iLUs.
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Table 6-14
6-48.
6-43