Hitachi XP P9500 User Manual page 359

Selectable items
IEP
#
Because both PathID and Status are always displayed, you do not have
to specify any parameters.
In the sub-parameters following -path -item, you can list the paths (-
hdev) and sort the list (-srt). If you omit both parameters, the command
displays information for all the paths in ascending order of AutoPATH_IDs.
These sub-parameters are:
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
Specify the name of the logical device file (minus the slice number, in
cUtXdY format) for the HDLM device to indicate the desired host
device.
The host-device-name string is case sensitive.
When you specify this parameter, HDevName is displayed by default. It
is not necessary to specify hd for the -item parameter.
-stname
Use this parameter to display the model ID of the storage system in
the product ID element of the DskName field. When this parameter is
omitted, the command displays the product ID or emulation type of
the storage system instead.
For details about the information to be displayed for product IDs, see
Table 6-14 Product ID Displayed by the view -path Operation on page
6-48.
When you use this parameter, DskName is displayed by default. It is
not necessary to specify dn for the -item parameter.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The available parameter values to specify the second sorting key are:
• pn: Path name
• lu: LU number of the storage system
• cp: Port number of the CHA
When the -srt parameter is omitted, the path information is listed in
order of ascending AutoPATH_IDs.
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
iep
Command Reference
Sub-parameters
6-41