To Display The Format Of The Set Operation - Hitachi XP P9500 User Manual

user or 1
local0 or 16
local1 or 17
local2 or 18
local3 or 19
local4 or 20
local5 or 21
local6 or 22
local7 or 23
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message. For
example, when you want to execute the command in a shell script or
batch file.

To display the format of the set operation

-help
Displays the format of the set operation.
Example
Table 6-9 Values of the Audit Log Facility
Value Corresponding facility value in the /etc/syslog.conf file
user
local0
local1
local2
local3
local4
local5
local6
local7
# /opt/DynamicLinkManager/bin/dlnkmgr set -help
set:
Format
dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio
| lbk | exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize
| -elfn Number-Of-ElogFiles
| -systflv TraceLevel
| -systfs TraceFileSize
| -systfn Number-Of-TraceFiles
| -pchk on [ -intvl Interval-Time ]
| -pchk off
| -afb
| -afb
| -iem
| -iem
| -lic
| -audlog on
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
on [ -intvl Interval-Time ]
off
on
[ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
off
6-29