Hitachi XP P9500 User Manual page 300

Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Using a text editor, edit the definitions in the HDLM driver unconfiguration
definition file (/opt/DynamicLinkManager/config/dlmfdrv.unconf) for
the LU to be managed by HDLM. Based on the path information of the LU
to be managed by HDLM checked in step 2 (shaded portion), find the
correct LU in the HDLM driver unconfiguration definition file (/opt/
DynamicLinkManager/config/dlmfdrv.unconf), and add a hash mark
(#) in front of the LDEV property line corresponding to the LU. Adding the
hash mark specifies that the LU indicated by that LDEV attribute is to be
managed by HDLM.
Figure 4-14 The /opt/DynamicLinkManager/config/dlmfdrv.unconf file
(before editing) on page 4-54
DynamicLinkManager/config/dlmfdrv.unconf file (after editing) on page
4-54
file (/opt/DynamicLinkManager/config/dlmfdrv.unconf).
The shaded portion indicates the text to be edited.
Note
10
Apply the settings in the HDLM driver unconfiguration definition file (/
.
opt/DynamicLinkManager/config/dlmfdrv.unconf) to the HDLM driver
configuration definition file (/kernel/drv/dlmfdrv.conf):
Execute the following command:
# /opt/DynamicLinkManager/bin/dlmsetconf -u
11
If you are using VxVM, you need to disable, from VxVM, any devices
.
(such as sd or ssd devices) other than the devices corresponding to the
added LU.
4-54
show examples of editing the HDLM driver unconfiguration definition
Figure 4-14 The /opt/DynamicLinkManager/config/dlmfdrv.unconf
Figure 4-15 The /opt/DynamicLinkManager/config/dlmfdrv.unconf
Do not make any modifications other than adding or deleting the hash
mark (#) in front of the LDEV property line corresponding to the LU.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
and
Figure 4-15 The /opt/
file (before editing)
file (after editing)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents