Hitachi XP P9500 User Manual page 297

example of executing the format command. The shaded portion
represents an LU not managed by HDLM.
Figure 4-12 Example of executing the format command
12 Delete the device ID information for devices that do not exist.
.
Execute the following command:
# /usr/cluster/bin/scdidadm -C
13 Allocate the device ID.
.
Execute the following command:
# /usr/cluster/bin/scdidadm -r
Note
The following message might be output when the scdidadm -r
command is executed:
Unable to open '/dev/rdsk/c5t50060E80033A9902d2s2'
This message is output when a logical device file for a non-HDLM-
managed device exists. Delete the unnecessary logical device file. For
details, refer to the Sun Cluster documentation.
14 Notify the node of the most recent device ID information.
.
Execute the following command:
# /usr/cluster/bin/scdidadm -ui
15 Update the Sun Cluster global device namespace.
.
Execute the following command:
# /usr/cluster/bin/scgdevs
16 When using a non-HDLM-managed device, as a Quorum device, set up
.
the Quorum device in any node on the cluster.
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
HDLM Operation
4-51