Adding A New Lu By Restarting The Nodes (When Using Sun Cluster) - Hitachi XP P9500 User Manual

# /opt/DynamicLinkManager/bin/dlmcfgmgr -a
In environments not supporting dynamic reconfiguration of HDLM devices,
restart the host, with the reconfiguration option specified.
# reboot -- -r
7 Check the status of the path for accessing the added LU.
.
The following shows an example of executing the command. The shaded
portion represents the path that accesses the added LU.
8 Register the added LU to the application.
.

Adding a New LU By Restarting the Nodes (When Using Sun Cluster)

Note
Have the HDLM drivers on all nodes in the cluster recognize the LU newly
recognized by the node, and make the configuration the same for each
node.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
4-25