Removing Devices From Vxvm On A Controller Basis - Hitachi XP P9500 User Manual

The settings files necessary for device suppression are created by
selecting menu task 17 (Prevent multipathing/Suppress devices
from VxVM's view) or 18 (Allow multipathing/Unsuppress devices
from VxVM's view) from the vxdiskadm main menu, and then by
selecting menu task 8 (List currently suppressed/non-multipathed
devices) from the VolumeManager/Disk/ExcludeDevices or
VolumeManager/Disk/IncludeDevices menu.

Removing Devices from VxVM on a Controller Basis

If physical paths connected to one LU go through different HBAs, devices are
removed from VxVM on a controller or path basis. The procedure for
removing devices from VxVM on a controller basis is described below by using
the configuration example shown in
alternate path differ from those on the primary path connected to the Hitachi
storage system on page
recognized by VxVM before devices are removed.
3-142
3-143. This figure shows a configuration that is
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Figure 3-24 When HBA ports on the